Octopus Saving Sessions

You can burst higher than the main fuse for 15 minutes or so I believe.

I am fortunate to have a 100amp main fuse and have put through some serious amps with agile drops.

1 Like

I’ve seen reports of drawing over 60 amps for a limited time with a 60 amp fuse. But I got very nervous approaching the max and was watching it nervously for about 15 minutes. If it had gone over, it’d have been :poop: time!

I’ve always thought of contacting the DNO for a 100amp fuse, but as it’s my mission to cut energy as much as possible, that move seems contrary somehow.

1 Like

There is a chance they wouldnt approve it unless you had need such as a heat pump sadly.

On agile down days I will see 22KW going through my connection but it has been higher for bursts.

Side question, what HA theme is that again?

We have an Air-to-Air exchanger (single room heat pump/aircon), which sorts out the downstairs temperature OK, but doesn’t do hot water (still on gas for that :scream:) - but it is very efficient in terms of current draw - no need for any uprated fuse there….

The HA theme I’m using is the ā€˜ios-dark-mode-blue-red’, which is part of this theme pack:

3 Likes

I’ve no idea what 90% of that means, but I ain’t half impressed.

2 Likes

That’s a simplified version! - no EV metrics or Nest Thermostat in there now. The current car has V2L capabilities which is giving me a headache for monitoring when connected to a limited house ring to power certain things overnight and I’ve switched from Nest to tado for heating (thanks to Google sunsetting the Nest Thermo V2). I still have to set up the tado devices properly via matter to report into Home Assistant.

It may look impressive, but I’m desperately trying to switch away from Home Assistant to Google Home - basically to let the rest of the family have some easy-to-do control over the house.

Most of the device recognition & automation in Google Home is now done & working (the automation scripting in Google Home is incredible) but the one thing I (still) need is a way to see Octopus Agile prices in Google Home natively. This seems a current impossibility for some reason.

I [cough] AI [cough] might have to code a routine to pull Octopus Agile rates into some applet which Google Home can report on for automation purposes. Work in progress…

The perfect ā€˜smart home’ is still an absolute (a) time-sink, (b) money-pit, (c) moving target, (d) myth

1 Like

Ahh yeah I knew I had seen it and had it installed at one point but I cleaned out a bunch a while ago.

Until it hits the google graveyard :wink: :+1:

1 Like

Nice new app design for OctoAid.

There have been 4x 1-hour :octopus: saving sessions in the last week. Which helps a tiny bit, as wholesale electricity prices have gone through the roof thanks to the hot weather and no wind.

Yeah it’s not pretty over the coming days.

Been thinking the same. Plunge pricing is much rarer now and regular even day time prices are very high. I would have thought all this heat would be producing excess solar / a deluge of cheap energy but what do I know?

2 Likes

The energy from solar is being eaten up by aircon and fans everywhere.

We need some wind to boost the clean energy into the grid - that’s when plunges happen. Like when it became very windy on Friday 24th July. We then got plunge pricing (below -1.302p) between 08:00 and 16:00 on Saturday 25th July :grinning_face:

2 Likes

David has the receipts :sweat_smile:

HomeAssistant log?

While I do still have HA running in the background, I barely touch it. The ā€˜log’ is (a) my memory of running around on a recent Saturday switching everything on, then off, (b) actual data from the Octopus Watch app:


1 Like

You need to remove this post and put it in this thread instead. Referrals are only allowed in the referral wiki